The SP-1 00 Stealth™ paver is a simply-designed low-maintenance
gravity-fed paver specifically for operating with a Shuttle Buggy® material transfei
vehicle or the LTV-1000 loader transfer vehicle. Gravity feeds the material directly to
the auger from the mass flow hopper, replacing the need for slat conveyors, hopper wings,
push rollers and tandem front bogies, thereby significantly reducing maintenance costs and
initial purchase price.
Click here for dimensions
ENGINE
Cummins 6 B5.9, 6-cylinder, 115 HIP (86 kw) @ 2,200 rpm.
PROPEL SYSTEM
Variable-displacement hydraulic pumps driving twospeed motors. Paving speed is 0-180 fpm
(0-54.9 m/min.); travel speed is 0-6 mph (0-9.7 kph).
ELECTRICAL SYSTEM
Heavy-duty 12-volt starting system with 12-volt operating system. 65-amp alternator.
AUGER
14" (356 mm) x 3/4' (19.1 mm) thick Ni-hard, hydraulicallyraisable auger system with
tilt capabilities which allow the operator to maintain a parallel position of the auger
and screed bottom.
TIRES
Drive - two 36' x 20" (914 mm x 508 mm) solid rubber. Front - two 36"x
12"(914 mm x 305 mm) solid rubber.
SCREED
10' (3.0 m) standard vibratory screed equipped with 32" (813 mm) wide, 1/2"(12.7
mm)thIckT-1 plate replaceable wearing surface. Crowning capability of 3.5% positive to 0.1
% negative.
FUME EXTRACTION SYSTEM
Two blowers - total air flow 4,200 cu t/min. (1119 cu m/min.).
CAPACITIES
Fuel - 75 gal (284 1). Hopper - 12 tons (110.9 IVIT), 110 lbs/cu ft (1,762 kg/cu m)
material. Cooling system - 5 gal (18.9 1). Hydrauk system 61 gal (2311).
WEIGHTS*
Without screed 24,920 lbs (11,304 kg). With S-10 screed 30,010 lbs (13,612 kg). With E-10
screed 32,400 lbs (14,696 kg).
* Weight will vary with different screed options
OPTIONAL EOUIPMENT
SCREED EXTENSIONS
Standard screed may be extended to 24' (7.3 m) with no external support using 6* (152 mm),
12"(305 mm), 24' (610 mm) and 36" (914 mm) extensions. A 24" (610 mm)
extension is available with crowning.
TUNNEL AND AUGER EXTENSION
Tunnel and Ni-hard auger extensions are available to optimize material feed across the
screed when using screed extensions.
HYDRAULIC STRIKE-OFF EXTENSION
Left- and right-hand hydraulic strike-offs permit rapid changes in paving widths up to 4'
(11.2 m) on either side of the 10' (3.0 m) standard screed while paving. Either side may
be articulated from 6.6% to negative 3.3% for crown or wedge courses by use of electric
Jack Screws or hydraulically.
AUTOMATIC GRADE CONTROL
An electric/hydraulic system that automatically controls the elevation of the mat being
placed on one side of the machine with respect to a reference surface such as an adjacent
mat or curb. Also available in sets to control mat elevation on both sides of the
paver/finisher simultaneously.
AUTOMATIC SLOPE CONTROL
Slope may be maintained with respect to either the right or left reference grade of the
screed.
AVERAGING SKI
30' (9.1 m) and 40' (12.2 m) skis provide improved leveling of existing surfaces by
providing an average reference grade for the automatic grade control.
CUTOFF SHOES
One- and two-foot (0.3 m and 0.6 m) cutoff shoes are available for reduced-width paving.
PROPANE BURNERS
HYDRAULIC GENERATOR
SONIC GRADE AND SLOPE CONTROLS
