The SB-2500 Shuttle Buggy® material transfer vehicle can move great
distances away from the paver, receive 25 tons of hot mix and then return and transfer the
mix without interfering with the paver's continuous speed. A triple-pitch Ni-Hard
segmented anti-segregation auger remixes the asphalt, eliminating segregation and cold
truck ends. The continuous paving operation creates pavement smoothness levels previously
unattainable.
Click here for dimensions
ENGINE
Cummins 6 CTA8.3260 diesel, 505 cu in (8.28 1),6-cylinder engine, 276 HP (206 kw) @ 1,900
rpm. Engine instru me ntation inc I u des tach/hour meter, oi I pressure, voltage and
emergency shutdown system.
OPERATOR'S STATION
Operator positions on both sides. Control panel swivels for use from either station
allowing for same-lane or adjacent-lane operation from either side. Inside turning radius
26'6" (8.1 m).
GROUND DRIVE
All hydrostatic for continuously variable speed control with two speed ranges. Electric
shift-on-the-go control between high and low. Hydraulic shift between working and
transport ranges. Maximum speed (working range) 3.0 mph (4.8 kph). Maximum speed (travel
range) 9 mph (14.5 kph).
TIRES
Large, high-flotation - 21:00 x 25" (53.3 m x 635 mm).
ELECTRICAL SYSTEM
Standard system includes heavy-duty alternator, battery, and circuit breaker protection of
all systems.
FUME EXTRACTION SYSTEM
Two blowers -total air flow 4,200 cu f/min. (118.9 cu m/min.). Fold-down10"(254 mm)
exhaust pipes. SLAT CONVEYORS TRUCK UNLOADING (C-1): High-capacity truck unloading system
with low deck height, 9'2" (2.8 m) side truck opening and 29" (737 mm) o.d. x
7" (178 mm) deep Ni-Hard segmented converging auger for quick material flow. Conveyor
has weld-on f lights 5/8" (16 mm) thick, 7" (178 mm) wide x 58" (1,473 mm)
long. Ni-Hard liner plates are removable. Power dump front hopper has a vibrator on the
bottom that helps keep material moving.
Fixed push roller is standard. Conveyor capacity is rated at 1,000 TPH (907 MTPH).
SURGE BIN (C-2)
Unloads the surge bin with a multi-pitch 29" (737 mm) o.d. x 7" (178 mm) deep
NiHard segmented anti-segregation auger in the hopper. Conveyor system has weldon flights
5/8" (16 mm) thick, 7" (178 mm) wide x dual 16" (406 mm) long. Liner plates
are Ni-Hard and removable. Conveyor capacity is 600 TPH (544 MTPH).
PAVER LOADING (C-3)
Conveyor swings 55 degrees to either side of center. Maximum conveyor discharge
height is 12' 2' (3.7 m) f rom ground level. Conveyor flights welded to the chain are
5/8" (16 mm) thick, 3" (76.2 mm) wide and 30" (762 mm) long. Conveyor has
bolted
1/2"(12.7mm)T-1 replaceable floor plates and doors. C-2 and C-3 conveyors have
on/off controls that are interlocked. Conveyor capacity is 600 TPH (544 MTPH).
HOPPERINSERT
A mass-flow paver hopper insert is used to increase the hopper capacity of a
conventional paver when used with the S13-2500.
CAPACITIES
Fuel tank 150 gal (568 1)
Hopper 25 tons (22.7 MT)
material 120 lbs/cu ft (1,922 kg/cu m)
WEIGHTS
Shipping weight ........... 76,000 lbs (34,473
kg)
OPTIONS
Spray down system
Hydraulic generator set
Windrow attachment
Road widener attachment
